Implements SimpleGUI events from a TouchScreen

CP881 for Cariad

A library for managing the periodic execution of multiple tasks

Virtual base class for sensors that measure motion

A library that helps you to calculate greenhouse topics such as VPD.

Class library for internal ADC and DAC connected by SPI. ADC is triggered by TIM2. This library support clock generator using TIM3 for switched-capacitor filter to smooth output signal of DAC. This library includes derivative class to support interrupt occured in end of AD conversion. Slave select of SPI for DAC is generated using TIM4. Validated for ST Nucleo F401RE, F411RE. New version. 内蔵 ADC と，SPI 接続の DAC のためのクラスライブラリ．ADC の変換開始トリガは TIM2 で発生．DAC の出力信号を平滑化するためのスイッチトキャパシタフィルタ用のクロックは TIM3 を使用．DAC の SPI 用スレーブ選択信号は TIM4 で発生．ST Nucleo F401RE，F411RE で動作を確認．新バージョン

Driver for CC3000 Wi-Fi module

Arduino library to control Cubic PM2008 I2C

Library is used for microcontroller ESP with Arduino framework to connect to Goldeneye Hubs System.

Calibrated Sharp distance sensors

SMPTE timedode (LTC) decode library for mbed

V148

A lib to control the sainsmart TTL Lcd

A simple library to access the DMA functionality.

enc

A lib to handle a E-Paper display from Jiaxian Displays. The lib can handle graphic and text drawing and is using external fonts. SPI interface.

The helper class of HTTPClient library which add some function to send custom HTTP header and payload with STARTTLS upport.

mbed-os for GR-LYCHEE

Use to drive all devices provided by Makeblock company. This library allows an Arduino board to control all devices provided by Makeblock company.

Library for FRAM for Arduino.

Library for PS2 Interface. Use this library for PS2 Interface.

Arduino Library for MS5607 pressure sensor IC

xbee lib changé

Sonos UPnP is an UPnP based remote control library for the Sonos speaker system. The library supports both controlling and reading the state of Sonos speakers connected to your LAN.

CP883 for Cariad

Library for I2C Communication with ST LIS2DH12 low power accelerometer. An Arduino Library to interface to the very low power LIS2DH12 tri-axis accelerometer. Works with the SparkFun <a href="https://www.sparkfun.com/products/15170">Edge</a>, <a href="https://www.sparkfun.com/products/15420">Edge 2</a>, and <a href="https://www.sparkfun.com/products/15760">LIS2DH12 Qwiic</a> breakout board.

Library for the serial LCD-09396 of Sparkfun

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Flexible templated function class and related utilities that avoid dynamic memory allocation without limiting functionality

https://github.com/ARMmbed/ntp-client

This program is porting rosserial_arduino for mbed http://www.ros.org/wiki/rosserial_arduino This program supported the revision of 169 of rosserial.

ESP8266 driver to run LED matrix. ESP8266 driver to run LED matrix 64x16, and can be modified to support 64x32, supporting ASCII encoding only.

tft controler

C library/driver for the Maxim Sensor Hub. Reusable sensor hub code for MAX32664, MAXREFDES101, MAXREFDES220.

Arduino library to control Multi Channel Rely.

Arduino library for MAX17043/MAX17044 lithium ion battery fuel gauge. Provides a simple interface for monitoring battery charge levels. Works with any device using the Maxmim MAX17043 or MAX17044 chip such as the SparkFun LiPo Fuel Gauge.

ESP32 logging tools

A standalone, dependecy-less library that implements the Raver Lights logging infrastucture for use with Arduino, PlatformIO, and WASM

Seeed Grove Temperature sensor component library

Unipolar stepper motor operation library

lnurl library for platformio

Bosch BMP3XX sensors series library wrapper for Arduino. This libary can be used with any bmp3XX module that support I2C or SPI communication like adafruit BMP388, bluedot BMP388 and probably many others.

ID12 RFID library for reading 125KHz RFID tags

FreeRTOS v_8.2.1 for LPC1768

An intuitive and easy to use Arduino library for interfacing with the AAU1401, ADAU1701 or ADAU1702 audio DSP over i2c

Arduino library for the MMA8451 Accelerometer sensors in the Adafruit shop

Lab exercises for the Mioduino.

Arduino library for Texas Instruments TCA9546A 4-Channel I2C Multiplexer/Switch With Reset Function

LED Strip Animation and Effects Framework for Arduino

Library for M5Stack Timer-CAM development kit

Receiver interface for the fischertechnik IR control set

An Arduino library for controlling Train Simulator. Works only on HID-enabled boards.

A fixed point library from Trenki http://www.trenki.net/content/view/17/1/ Slightly modified so that the fixed point data structure can automatically cast itself to float or int when used in an expression.

NRF52 battery voltage read.

ADC Library

Forked Romi 32U4 Arduino library. This library helps interface with the on-board hardware on the Pololu Romi 32U4 Control Board. Modified for RBE 200X

CAN Bus library for MRMS mrm-us1. CAN Bus connectivity and local functions exposed via CAN Bus for ultrasonic sensor

Adafruit's 128x64 Graphic VFD Display Library

Expansion SW library to control high power stepper motor(s) using IHM03A1 expansion board(s) with Powerstep01 driver.

MARMEX-VB : "Mary Camera module" library

SH1106 Oled driver which offers scrolling frames, custom fonts, etc

simple Graphics LCD library. This Lib is used with GDM12864B 128x64 display.

Library for A4963 brushless motor controler.

Arduino library to interface with the Argent Data Systems weather station sensor assembly. Provides a convineint API to handlie the hardware interface.

A lite library for operations in linear algebra

CppUTest is a C /C++ based unit xUnit test framework for unit testing and for test-driving your code.

forked due to errors in with my idw01m1 on f401

Wake On Lan

Support for Sensirion's SPS30 particulate matter sensor. The SPS30 has mass concentrations for pm1, pm2.5, pm4, and pm10, plus number concentrations for pm0.5, pm1, pm2.5, pm4, and pm10

A library to add support for rc receivers. This library can read and decode PPM signals from simple RC receivers. On Arduino Uno there are 2 channels supported, on others like leonardo or mega, 4 channels.

TinyXml is a compact library that implements XML Parsing and Manipulation.

This library can parse CAN data sent by MITSUBA Inverter.

A fork of ArduinoHttpClient with simpler support for basic authentication (for POSR only).

Arduino library for using the TSL2561 Luminosity sensor

Ufox devkit Sigfox RC4. Kit de desarrollo Sigfox para region RC4 (Wisol WSSFM10R4 + Atmega32u4).

Arduino library to control Seeed Inductive Sensor LDC1612.

Simple PID controller class with output clamp

PCM Player for Magnetone

Allows you to control 8-channel I²C-bus multiplexer PCA9547. The library allows you to switch channels from 0 to 8 on the I²C hub.

Maxbotix ultrasonic distance sensor library

Simple Wireless Abstract Protocol (SWAP) library for ISM radios

convierte datos binarios a formato UTF8

Descriptive Statistics for Arduino. Descriptive statistics such as mean, geometric mean, maximum, minimum, sample standard deviation and standard error, median, mode, coefficient of variation. Written for float arrays.

Get lunar phase information on a esp32. Esp32 library to calculate the moon phase angle and luminated visible surface now or at a given time.

ESP8266 Simple-Pair library that exchange basic data without connecting WiFi

Toute les bases des 10 axes

a

Simple settings management for ESP8266.

4D LABS PICASO-SGC Command Set

Arduino library for BH1750FVI (GY-30) lux sensor. Includes compensation for angle, temperature and (experimental) wavelength.

<font color="#0066CC">Library for the Talk2 Boards.</font>. This library contains HAL (Hardware Abstratction Layer) drivers to be used with Talk2 Boards like the Whisper Node. Please make sure you're using a recent version of the Arduino IDE.

Avnet - Precompiled eCompass library for the Wi-Go board

Biblio à utiliser pour communiquer avec la carte moteur

NB-IoT library for hellothing BG96 Arduino shield. This is a NB-IoT library for the hellothing Arduino shield that works with a Quectel BG96 modem. The shield is compatible with various Arduino boards, for example the Uno, Due and Mega2560

Arduino library for light and fast communication with the MPU6050. Retrieve accelero and gyro data from MPU6050. Compute X and Y tilt angles of the device.

Get started with Arduino by learning Morse code. Send Morse code using any device that you can blink, move, or beep with your Arduino. "CQ CQ CQ DE ARDUINO K" "ARDUINO DE YOU <KN>"

Arduino library for controlling single-wire-based LED pixels and strip. Takes advantage of hardware acceleration available in Alorium Technology's XLR8 product. Doesn't use AVR memory, doesn't require disabling interrupts during show() routine, doesn't lose resolution on RGB values when setting brightness low then high. Does provide an awesome drop-in replacement for the standard NeoPixel library.

A Roboteq controller c interface to allow a Brushless motor control on a CAN bus.Used for a HBL2360 reference.

Arduino ABB PowerOne Aurora inverter communication protocol, esp8266 and esp32 Library. Library that implements the complete communication protocol of ABB (ex PowerOne) Aurora Inverter suitable with Arduino, esp8266 and esp32.