Helps using your Arduino board to Wi-Fi easily and fast

A library to control the Texas Instruments LP55231 9-channel LED driver. Provides interface class for LP55231, implementing direct control over LED outputs, as well as a more sophisticated interface to the independent execution engines.

This is a library for the Serialize date into Message pack format.

Setup for higher clock frequency

Tools for the Peripheral Touch Controller on the ATSAMD chips.

A library for the use of AM2303 (a.k.a. DHT22), a temperature and humidity sensor.

The first Z80 emulation library for Arduino. Near-to-complete emulation of software and hardware functions, capable of running z80 assembly, main and extended sets.

library for 9dof using madgwick's algorithm

Extension of original I2CSlave library to support multiple slave addresses and interrupts.

Xbee testing for cansat

メカナム or オムニ

Arduino library to control Grove - RTC DS1307.

Forked from Jose R. Padron and Aaron Berk's library, customized for my specific application using 9DoF-Stick by Sparkfun.

This library allows communication with Phico Datavision LCD. This library allows communication with Phico Datavision LCD-display module model no: DV-16215-1-S2RB.

DHT sensor for measuring temperature

Arduino library to control Grove IR Matrix Temperature sensor AMG8833.

The library for the Velleman VMA11 FM stereo arduino shield and the MM100 mini-module. Based on a modified version of the sparkfun Si4703_breakout library, with non-blocking RDS functions.

VBus

NXP PCF8576 Universal LCD driver for low multiplex rates + GH08172 LCD library

A library to drive the Bosch BME280 Altimeter and Pressure sensor. The SparkFun CCS811/BME280 Environmental Combo Breakout takes care of all your atmospheric-quality sensing needs with the popular CCS811 and BME280 ICs. This unique breakout provides a variety of environmental data, including barometric pressure, humidity, temperature, TVOCs and equivalent CO2 (or eCO2) levels.

An implementation of the Sirf Binary and NMEA Protocol for gps devices using the SiRFstarIII chipset

port of a small MD5 library (see http://www.zedwood.com/article/121/cpp-md5-function ). I have removed the stream functionality (saves about 10k flash and 8k RAM)

Mbed SDK for XRange SX1272 LoRa module

Library for robot Cing with Attiny85. This library simplifies programming of robot Cing.

A wrapper for the Instructables API for Arduino (supports ESP8266, ESP32 & WiFi101 boards). Use this library to get Instructables statistics

Enables NMRA DCC Communication. This library allows you to interface to a NMRA DCC track signal and receive DCC commands. The library has been tested on AVR ATTiny84/85 & ATMega88/168/328/32u4, ESP8266 and Teensy 3.x using the INT0/1 Hardware Interrupt and micros() ONLY and no longer uses Timer0 Compare Match B, which makes it much more portable to other platforms.

Heavily documented control library for the uOLED-96-G1 (SGC) by 4D Systems. Will likely work with any of the 4D Systems serial controlled screens. <<info>> All examples in the documentation have been tested to the best of my current abilities, but there are a few functions that I simply do not use. I have created a Lighthouse page for this library. You may submit bug reports or feature requests to [[http://mbed-uoled.lighthouseapp.com|this page]]. If you really do not wish to sign up for a Light

A client library for MQTT messaging. MQTT is a lightweight messaging protocol ideal for small devices.

Enables network connection (local and Internet) using W5500 based Ethernet shields. With this library you can use W5500 based Ethernet shields, such as the 'Arduino Ethernet Shield v2' to connect to Internet, but not older W5100 based shields. The library provides both Client and server functionalities. The library permits you to connect to a local network also with DHCP and to resolve DNS.

Accelerometer library

This library enables users to communicate with the ADXL345 accelerometer through the I2C bus on the mbed. The API names are similar and work nearly the same way as those made in the SPI libraries for the ADXL345.

OneWireEEPROM

A library to control BK8000L based bluetooth audio module.

ST driver for the mbed BLE API.

SAMD51 Interrupt Timer library for e.g. Adafruit M4 Metro/Feather/ItsyBitsy Express

Drivers for Pololu irs09a short range infra red sensor.

Library with fast map function for Arduino.

CanInterface Dispatcher, it depends on MyThread (MyThings lib)

SSD1305 library for Monochrome OLEDs based on SSD1305 drivers

mbed library for XPT2046 SPI Touchscreen Controller (TFT_320QVT module)

azure-iot-c-sdk for nucleo_f767zi on mbed os

NUCLEO F446REでSDｶｰﾄﾞへの書き込み、読み込み、削除

mediCAL's first BLE project

A library for FaBo Color I2C Brick. S11059 is color sensor.

Library for Maxim DS3232M super-accurate, I2C based Real Time Clock chip with 234 bytes of user RAM. Library includes user RAM read/write operations along with CRC routines for accessing the user RAM area.

Websocket client library (fast data sending). The library can wrap around a generic Arduino Client() class or similar interface (e.g. EthernetClient(), WiFiClient(), WiflyClient(), ...) and is optimized in speed for data sending.

Library to communicate with a ST LIS331DLH

Serial Communication/ Analog Read/ FFT compute / LCD Text / Write on SD Card / read and write RTC application. K64F app developed for Electrical Engineering undergraduate final project at Ulbra university.

Non-blocking C/C++ library to manage blinking devices (for example, a LED) changing the state in ON-OFF time intervals.

DiplayApp library

Simple library to use the TI ADC0848 with the MBED Ports Library. This Library can be used either in polling or interrupt modes.

Simple abstraction library implementing delays and timeouts. Implements delays and timeouts. Uses millis() and micros(), taking care of any rollovers should they occur. GNU LGPL v2.1

Alphanumeric LED display, 8 digits, 5x7 pattern. Supports 8x1, 8x2, 16x1 and 16x2 display configuration.

editable serial input line buffer

Air_Quality Sensor Library

Useful Arduino library to convert days, hours. minutes, seconds or milliseconds (e.g days to minutes). In future it will be extended by another type of converters (not only datetime converter).

A simple library to interface from Arduino to BlueSMiRF to MetaWatch. Sets up auto-connection between Arduino and the MetaWatch, and gives user control over the backlight, time settings, and battery level readings.

The ESP-8266 server for the Telemetrix Project. This sketch is a server for the telemetrix and telemetrix-aio Python clients. It provides WiFi remote control and monitoring of Arduino-Core ESP-8266 devices.

Get time of sunrise and sunset. Given some basic data, such as geographic coordinates and a date, an estimate time of apparent sunrise or sunset is returned in minutes elapsed since midnight. This is a paired down port of the NOAA Solar Calculator.

Seeed Arduino Infrared Library. Library for receiving, decoding, and sending infrared signals using Arduino

Controlling library for strands of LPD6803 LED pixel dots.

Driver for Adafruit's LSM303DLHC 9-DOF breakout

Library for a board called Motor3

Basic Encoder Library for Sparkfun's Hall- Effect Encoder Kit Part# ROB-12629

Turns your Arduino into a seven segment display controller!. Use it to easily display numbers on your seven segment display without any additional hardware. Supports common cathode and common anode displays, the use of switching transistors, decimal numbers, hexadecimal numbers, and alphanumeric characters.

BLE beacon library compatible with LINE Simple Beacon. Light-weight & Simple library that makes your any ESP32 boards into BLE beacon device compatible with LINE Simple Beacon.

Library for an Arduino or ESP8266 supporting various utility macros and functions

First working version of a FATFileSystem compatible Chan FAT v0.8 implementation. This is intended to use with long file names and RTOS support.For now long file names work but RTOS support is still untested.

Complete library that let you control and read your servo's in all ways: position, degrees, step.You can define also min and max position.It is also compatibile with Simon Ford's Servo library calls

Nucleo-F446RE 内蔵の AD/DA を使うためのライブラリ．DA からの出力は，標本化周波数の４倍のレートで行う．AD の読み込みにはソフトウェア割り込みを使用． このライブラリを登録した際のプログラム： Demo_F446_AD_DA_MultirateSWI. Library for built-in ADC and DAC in Nucleo-F446RE using software interrupt for reading ADC. Sampling rate for DAC is four times of that for ADC.

Arduino library for compact array of objects with a size expressed in bits. typically 1..10

Gives tone() functionality with 8-bit volume control with no extra parts!

Testing C030_R410M

Extension of the standard Arduino EEPROM library for reading and writing basic types, structs, strings, arrays and more.

A library to drive the X9C102/103/104/503 Digitally Controlled Potentiometers. It allows you to control the pot by setting absolute values for either the chip's counter or actaul resistance, or by relative offsets. It allows you to save the current value in the chip's non-volaile memory.

Control thousands of WS2811/2812 LEDs at video refresh speeds

A simple interface for serial communication.

not coded yet stub

Class library for WS2812B. Board: Nucleo-F401RE and Nucleo-F446RE using SPI. WS2812B 用クラスライブラリ．SPI を使用．

74595 Library

Enables sending REST messages using Arduino Ethernet. For all boards. With this library you can use Arduino Ethernet (shield or board) to send your sensor data via HTTP query args as Internet Of Things (IOT) messages. The library provides 'REST' Client functionality. This library uses the Ethernet library to connect to local networks and/or the Internet with DHCP and DNS.

Remote Procedure Call (RPC) over Websockets (uses MbedJSONValue)

An implementation of the rosserial protocol for Arduino

This library is designed to work with devices like the LM335 temperature sensor. There are only two requirements for compatibility: 1) The device must be a sensor device that has ...

Automatic OTA library for ESP8266

A CBOR (RFC 7049) processing library. This implements basic read and write functionality. It also provides some parsing and EEPROM helper functions.

Library for the Sensirion SCD30 CO2 Sensor

An alternative library for use with the Arduboy game system. This is a fork of the Arduboy library, with a main goal of providing ways in which more code space can be freed for use by large sketches. It remains substantially compatible with Arduboy library V1.1, with the main API difference being that the "tones" subclass has been removed and its functionality made available in a separate ArduboyPlaytune library. Removal of "tones" also allows other audio functions and libraries to be used, such as ArduboyTones.

For Sharp GP2Y0E03(optical distance measurement sensor).

A library to control a board using a stream (e.g., serial). This library implements the core ASIP protocol for I/O pins and some additional simple services

Library to operate GPS 20u7 with Mbed

Enables communication between microcontroller and MIPS cpu. Natively support network communications, terminal (linux) and file access. Create your own Ciao Connector for your needs and easily use it. Works only on Linino based boards like Yún, Yún Mini, Tian and Industrial 101.

This is a 16-pin IO-expander with extended examples and interrupt handling.

pin detect library

please publish my library

Block access only to a SD Flash card conected via SPI. Based on SDFileSystem, but without any file system support.

an error test

two output pin,one indicates Positive or negative polarity,the other converts the analog value(0~10) to pwm output(digital output 0~229)

analogIn with DMA