Ultra Low Power 3D accelerometer. This library provides Arduino support for the Ultra Low Power 3D accelerometer LIS2DW12 for STM32 boards.

Low power management for MegaAVR 0-series MCU.

Mutex Locker utility class to lock/unlock mbed RTOS mutexes. Create and pass a mutex, it locks the mutex then unlocks it when destroyed.

PMW3901 Optical flow sensor driver. Provides access to X/Y motion count.

Library for 16-channel, 12-bit PWM controller NXP PCA9685.

Audio Jack Modem Library for Arduino. Generates a FSK-modulated signal that can be fed into an audio jack for data transmission.

Arduino library for MERG CBUS LED processing. Implements non-blocking control of LEDs

Required for all Adafruit Unified Sensor based libraries. A unified sensor abstraction layer used by many Adafruit sensor libraries.

Allows controlling the Arduino Robot via an IR remote control. For Arduino Robot only.

Code to read a PPM/PWM pulse, interrupt driven. Most useful for RC receivers. Code is non-blocking, and a poll of the stall timer can detect if a signal has been lost (signal changes will reset the timer). Code originally written by Simon Ford, modified by me to add in a lost-signal guard.

AVR optimized library providing ability to build up ah event-based frame

Helpful logging and error format

Parallel bus (address 8 bit, data 8 bit) access sample using GPIO pins.

Bluetooth hc05 library

Automatically saves exception details and stack trace to flash in case of ESP8266 crash.

Library to control the 24-bit load cell amplifier NAU7802. The Qwiic Scale from SparkFun is based on the NAU7802. This IC is a I2C controlled 24-bit ADC capable of converting load cells into a digital signal. The SparkFun Qwiic Scale board makes it easy to create a digital scale without soldering. Checkout the <a href="https://www.sparkfun.com/products/15242">Qwiic Scale</a> for more information.

Triad Semiconductor library for configuring the TS4231 Light to Digital Converter. The TS4231 must be configured at power-up so this library is required to use the device.

A library to run Pablo, an Arduino based drawing machine. Pablo drives 2 stepper motors using the AccelStepper library.

Arduino Library for controlling the Analog Devices AD5231 SPI Digital Potentiometer (DigiPot). The Analog Devices AD5231 Digital Potentiometer (DigiPot) has a 10 bit resolution(1024) avalable in several values (10 kΩ, 50 kΩ, and 100 kΩ) with either 3-5V single supply or +/- 2.5V communicating over SPI.

Handles Rest requests including parsing of URIs with arguments. This library provides an Http handler for existing arduino HttpServer implementations that parse Rest endpoints (URIs) with embedded arguments such as string, integers or booleans. Parameterized endpoints can be bound to a function handler which receives a Request object with an 'args' collection that is indexable [] by name or orginal position.

Arduino library to build home automation devices with ESP8266

It communicate with a control panel via i2c. It can read buttons, joysticks and encoder state and write leds and led state.

Control many lights. Control many lights / LEDs and blink without delay or interrupts using commands such as on(), off(), blink(), and fade(). Lights can be connected to PWM or Digital Arduino pins to work with this library.

Arduino library for Silicon Labs Si7055 ±0.5°C Digital Temperature Sensor breakout board

SNMP Agenthttp://mbed.org/users/okini3939/notebook/agentbed-library/

Simple mbed 5-pin DIN to USB MIDI Converter library

Serial#Find method for Arduino, implemented in Mbed

Fork including the latest patches for the Adafruit ADXL345 Accelerometer library

NFC API for mbed using the MicroNFCBoard as a peripheral

Class for AD7390, a 12 bit SPI driven external DAC from Analog Devices.

TB6612FNG用のモータコントロールライブラリ

SCP1000 library with Software SPI interface

This library allows to schedule multiple actions along time.

An Arduino library for easy plotting on host computer via serial communication. Supports multi-variable plots against time as well as 2D plotting of an X vs Y variable. Multiple graphs can be displayed at once, with all formatting and scaling handled automatically. A stand-alone listener application, written with Processing, is provided.

An Arduino library for the ST LIS3DE. It supports getting the XYZ accelerations, setting parameters and using the interrupts.

D6T MEMS Thermal Sensors (Omron)

Google Firebase Realtime Database Arduino Client Library for Arduino MKR WiFi 1010, Arduino MKR VIDOR 4000 and Arduino UNO WiFi Rev.2. This client library provides the most reliable operations for read, store, update and delete the Firebase Realtime database.

Talk to EQ3 (Eqiva) Thermostats with an ESP32 over BLE

An Arduino Library to control the Flying Jalapeno test platform. The Flying Jalapeno is the name of the generic platform used to test various products at SparkFun. This is the Arduino library that wraps a handful of functions to make the FJ easier to use.

VCNL4100 High Sensitivity Long Distance Proximity and Ambient Light Sensor with I2C Interface

Simulate a flickering candle with an LED. This library handles math and timing only. You can implement any kind of RGB or single LED you like.

An Ion Specific Electrode Probe Interface. Use it to measure pH, ORP, or any other voltage based probe.

Library written to control PushBullet notifications using the ESP8266.

mbed library sources for GR-PEACH rev.B.

Coil, Current Transformer (CT) based AC current measurements using fast ADC sampling of waveform. Mesure currents, iRMS and similar with a current transformer or coil. Requires a simple bias circuit that ensures that the votlages fed to the ADC is swinging around a certain dc-offset; and this is then ran through a resistor to turn the current into a voltage. Actual curernt measurement is then made by fast sampling the waveform. Assumes relatively slow AC curernts (few 100Hz), such as typical household mains power supplies (50hz, 60hz)

Update of W5500 Interface for mbed-os

ArtNet with the ESP8266, ESP32 and more. Send and receive Art-Net frames using WiFi. Tested on ESP8266, ESP32, WiFi101 and WiFiNINA devices.

Library SX1276 Pinout for DISCO_B_L072CZ-LRWAN1 Board

ok

Lightweight library for the MAX7219 7 segment 8 digit display. Exposes two easy to use methods DisplayText(Text, Orientation) and DisplayChar(Digit, Char, DecimalPlace);

Library for non blocking controlling a ultrasonic sensor like HC-SR04

A C++ reworking of the GPIO calls for Arduino (Faster reads and writes!)

This is the copy of THE "minimal-printf" (Not my development). I copied but I couldn't find the library from the mbed community. I will fix it later

Utility functions for working with data streams

A library to convert byte streams of packets into floats. This Arduino library communication between two devices wishing to send streams of floats between them.

An easy to use Notecard Library for Arduino. Supports Serial and I2C for communication from a host MCU.

cube bite crypto lib

Library for easy handling of digital outputs on Midwest737Simulations.com Multi Output card. For cockpit builders that use Midwest737Simulations Multi Output card, this library provides basic support for sending data from any Arduino sketch. For the Teensy microcontroller, extended features, like direct access to datarefs are provided. Check docs and examples!

lib_LCD_i2c_SPTLYI http://fr.farnell.com/midas/mccog21605b6w-sptlyi/lcd-cog-2x16-stn-vert-b-l-i2c/dp/2063208 YSI

Block device class for creating a block device to access a SD/MMC card via SD/MMC interface on DISCO_F746NG

A library for the ADS1115 ADC. An Arduino library for the 16-bit, 4 channel ADS1115 ADC, convenient to use. All features of the ADS1115 are implemented, including alert functions.

Library for rtc 1307. RTC DS1307

Library for digital switches. Small library for momentary push switches. Detects press, double press, long press (either low/high or high/low transitions), with software debounce and auto repeat

library for MAX44009 Lux sensor Arduino.

Ambient library. It provides "set" function to set data to a packet and "send" function to send the packet to the Ambient server. It also provides "bulk_send" function to send multiple data. (Japanese: IoT用のクラウドサービス「Ambient」のデーター送信ライブラリーです。Ambientはマイコンから送られたセンサーデーターを受信し、蓄積し、可視化(グラフ化)します。http://ambidata.io)

RF driver for NXP KW41Z

A library that provides support for Modulo hardware.

for DISCO-F769NI based on BD_SD_DISCO_F746NG library by Roy Krikke

mbed library for STMicroelectronics' X-NUCLEO-IKA01A1 expansion board.

Arduino, ESP8266 and ESP32 library for DHT12 Temp & Humidity Sensors. DHT12 complete library (DHT clone library with same command and some addiction). I2c and OneWire support, connection schema of Arduino UNO, esp32 and esp8266 with examples.

Drivers for the mini robot designed for Princeton's MAE 433 course.

Implements functions to manage a panel of MAX72xx based LED modules. Allows the programmer to use the LED matrix panel as a pixel addressable display for graphics and text.

Generic mbed Extensions used by STM Expansion Board Firmware Packages.

A WebSocketClient that can be used with PubCubClient for MQTT over WebSockets. A WebSocketClient that implements Client.h so that the PubCubClient MQTT library can use it - with wss or ws

おぼぼぼぼぼぼぼぼぼぼぼぼぼぼぼ

Cross assembler and disassembler for retro CPUs

Command library for the Roboteq SDC21XX serie of DC Motor drivers, using CANopen Interface. This library replicates the CANopen commands detailled in the User's Manual for the SDC21XX Serie, Section 14 CANopen Interface. Please refer to this document for more details about the use of any of the commands.

USB FullSpeed (Mouse) host interface. This XB is used to host a USB connection from the XLR8 to a USB fullspeed Mouse device

Library for HopeRF RFM22 transceiver module ported to mbed. Original Software from Mike McCauley (mikem@open.com.au) . See http://www.open.com.au/mikem/arduino/RF22/

A simple class to do line-based TCP communication. To be used with the NetServicesMin library-.

Communication protocol for H36F

Protocol buffers with small code size.

Infrared communication library for the DIY Gamer Kit by Tech Will Save Us. Makes interfacing with the Gamer's infrared transmitter and receiver a walk in the park!

A class to fetch magnetometer and accelerometer data from the FXOS8700 on the K64F board

Fixed with HAL.

An Embedded Dictionary Server. Provides a command line interface and persistent key-value store.

LaufLicht

A library to read and write all 25* serial SPI eeprom devices from Microchip (from 25xx010 to 25xx1024).

The simple HTML Form Elements data interchanges library for ESP32/ESP8266 through the Webserver. The library allows user to send and receive the HTML Form Elements (input, select, textarea, radio, checkbox and button) to/from device (ESP32/ESP8266) based on the events.

plop

wrapper of TLS library to connect to HTTPS servers

MAX14661 Serial Controlled 16:2 Multiplexer

Arduino library to control Grove - 125KHz RFID Reader.

A Roboteq controller c++ interface to allow a Brushless motor control on a CAN bus.Used for a FBL2360 reference.

Adafruit Channel Visible Light / Color Sensor Breakout

Fujitsu MB85RCxx I2C FRAM access library

Nucleo ボードの USB コネクタに対応するシリアルポート受送信割込みで，複数のキャラクタ受送信をサポ－トするクラス． このライブラリを登録した際のプログラム： Demo_F446_AD_DA_Ctrl．

IMU

Arduino Unicode Font libraries.