Simple scheduler that run little tasks within IRSs.

Lib for FTDI FT800 Graphic Controller EVESupport up to 512 x 512 pixel resolution.Resistive touch senseMono audio outputSPI Interface

Homie Noded for Homie ESP8266 framework

Pololu's Arduino library for the XYZrobot Smart Servo A1-16. This library helps interface with the A1-16 smart servo from XYZrobot over serial.

Library used for program the Plu&Pi Black board. Allows simples control of the Plu&Pi Black educational board.

RS232 control for TVOne products

Library for Arduino Leonardo/Micro for moving the mouse to an absolute screen coordinate.

This is a library for the JY-LKM1638 Display

An Arduino library for sending and receiving data using LoRa radios. Supports Semtech SX1276/77/78/79 based boards/shields.

A first port of the excellent Adafruit ST7735 libraryAlso supports the S6D02A1 controller (Use 1k resistors in series on all logic lines).

A library that makes use of Krypton ion thruster controller. Change voltage of the pumps, speed and fuel flow to your ion krypton, argon, xenon or neon thruster.

Very Simple Library for the STM32F3-Discovery.

modified mbed-src to overclock K64F MCU to run at 128.125MHz,for running the UART at 8Mbps, call SystemCoreClockUpdate() at the beginning of your code to re-calculate the SystemCoreClock

Arduino library for controlling analog/digital multiplexers (A/D mux). This library offers a common, convenient interface to control analog/digital multiplexers of any size, like CMOS 4000 series (e.g. 8-channel 4051 (CD4051, 74HC4051), 16-channel 4067 (CD4067, 74HC4067)), 32-channel MegaMUX (ADG732), and so on.

SI114x UV index, IR and Visible Light sensor

Arduino library for the MCP320x 12 bit ADC family. The library supports: MCP3201, MCP3202, MCP3204, MCP3208

ServoTimer2 is a simple library for Arduino 1.x that does not use Timer1 in case of a conflict.

Arduino library to control RFbee V1.1 - Wireless Arduino compatible node. The RFBee is a RF module providing easy and flexible wireless data transmission between devices. It is based on a AVR ATmega168 working as a fully functional Arduino connected via SPI to a TI CC1101 RF transceiver..

A task queuing library for AVR and Arduino processors.

Library for use with the RenBuggy with 2 wheels that travels for an amount of time specified by the user.

LM74 temperature sensor Library on SPI I/F

Button and debounced input driver for mbed

A library for talking to Multi-Tech's Cellular SocketModem Devices.

Arduino library for M62429 volume control IC

Revision 2.0 of MAX3421E-based USB Host Shield Library

This is a VERY low-level library for controlling the TSI hardware module in a KL25 microcontroller. The programmer creates the TSI object passing basic parameters, and selects the active channels. Then, a scan on a given channel can be started, and the raw result can be read.

Arduino based multi-function shield library

msgpack based serializer and deserializer with packetize for Arduino and more

A library that allows an Arduino to interface with the popular Holtek HT1632C LED driver

pcm - u-law encode/decode

This library allows you to use all the functions of the Robopoly PRismino and the Robopoly Shield.

Library for LCD Interface. Use this library for LCD Interface.

Library to control NeoPixel strings of RGB leds

useless

DS1820 library for multiple devices

Schedule alarms to occur at specific times with crontab syntax. Using expressions suitable for the program cron (crontab syntax), the library allows performing tasks at specific times or after specific intervals. It depends on ctime library, provided by SDKs. API resembles the popular TimeAlarms library. Tasks can be created to continuously repeat or to occur only once. It is a wrapper of ccronexpr.

Allows Arduino boards to control the Sonos speaker system using UPnP. For all Arduino boards. Sonos UPnP is an UPnP based remote control library for the Sonos speaker system. The library supports both controlling and reading the state of Sonos speakers connected to your LAN.

Interrupt driven keypad/keyrow library for MCP23017 I2C GPIO port expander

A library to extend the core Asip library with additional services. This library includes additional services for Asip that do not require external libraries: servo motors, sonar distance sensors and tones.

Arduino Library for I2C 40-Channel I/O Expander PCA9698

A C library for buffering items into a ring (circular/FIFO) buffer. This library is perfect for capturing pin states, timestamps, etc.. during an ISR. Then in void loop(), the buffer can be asynchronously processed whenever your program has free time.

Arduino Library for DS3234 RTC

tone function Library

Library for Espressif ESP32 based line followers, using the MCP3008 ADC chip.

Changed RPC sucessful execution code from 1 to 200. Included RpcHandler.h in main header file. Effectively allows RPC through HTTP.

 The easiest way to implement ota on an esp8266 based chip using an HTTP server

A library for implementing a finite state machine. Supports events for exiting and entering states.

A fast full featured SPI driver for TFT drived by TFT_ST7735, fully SPI Transaction compatible and Fast. This library works with Teensy 3.1,Teensy 3.0,Teensy LC,8Bit Arduino's(UNO,2009,etc.), DUE

NeoHWSerial for AVR. Adaptation of NeoHWSerial by SlashDevin for AVR

store and read configuration from SPIFFS (wifi ap, wifi station, mqtt ..)

Fixedpoint and floatingpoint Fft practice for mbed.original url is https://github.com/hamling-ling/OsakanaFFT

NMEA GPS receiver

A stable, unit-tested filter library. Provides input filters. Modern, modular C++ design. Debugging support. Currently under development.

Arduino port of Paul Hsieh's 'SuperFastHash'. A very quick hash function, see http://www.azillionmonkeys.com/qed/hash.html for more information about its inner workings.

MSCFileSystem_Sherckuith

Firmware for the Physics Lab kit. This library depends on the ArduinoBLE and MKRIMU libraries.

My float map library

A driver for control MODI on Arduino

Arduino library to control Grove Temperature sensor MCP9600.

4 pins(vcc,gnd,tx,rx)

Class designed to store and invoke function pointers and method pointers

printf() on AQM0802

L6470 / L6480 wrapper for Arduino

Use Arduino to control your BalBoa Spa Pack. Monitor and control your WiFi connected BalBoa spa. This requires that your spa pack have the Balboa Wi-Fi module 50350 installed. If you can use the Balboa Worldwide App (bwa™) to control your spa, this should work as well. Tested on Arduino Uno, Arduino Mega 2560, Wemos D1 R1 (ESP8266) and Wemos D1 R32 (ESP32) boards.

Simple non blocking timer with callback function

A library to manage switch state transitions. Small library to manage switch state transitions. Detect single press/hold/release, double press/hold/release, long press/hold/release and toggle action (OFF/Rise/Rising/ON/Fall/Falling).

Easy to use and lightweight led light pattern player

A library to drive the TCA9534 I2C->GPIO. The Qwiic GPIO breaks out 8 extra GPIO on an I2C bus. With 8 configurable addresses, that's 64 extra GPIO on a single I2C Bus.

Lancaster University fork of the Nordic nrf51-SDK repository, which actually lives on github: https://github.com/lancaster-university/nrf51-sdk

Bleeding edge development version of the xDot library for mbed 5. This version of the library is not guaranteed to be stable or well tested and should not be used in production or deployment scenarios.

Flexible logger for Arduino

A library to interface with the LSM9DS1 IMU using SPI

Makes intergrating non interrupting lighting behaviours easy!. Allows for non interrupting lighting effects for single LED's.

Arduino RFID Library for MFRC522 (SPI, I2C and UART) with asynchroneous callbacks. Read/Write a RFID Card or Tag using the ISO/IEC 14443A/MIFARE interface. Modified from the original miguelbalboa to also support I2C and UART connections and provide, in addition to normal constant polling, an option to do asynchroneous callbacks. I.e. have a function called each time that a valid swipe has happend. Used at the https://makerspaceleiden.nl.

control motor with relay

Driver for the AnyLeaf pH and RTD sensors. Allows you to take pH and temperature readings, and calibrate the sensors.

Permet l'intitialisation simplifié de l'écran Adafruit SSD1306. L'ensemble des méhodes de la classe Adafruit_SSD1306 sont disponibles via la classe Ecran.

FT5206 capacitive Touch Panel driver for 7 inch BuyDisplay LCD, with 5-point touch.

Sparkfun Analog Joystick

for TFT2P0327 aitendo.com 128*160 TFT LCD. LCD driver is S6D0151 Sumsung.

pikachu!!pikapikka!!

Run you ESP without the need to write the boiler-plate code ever again.

Library for KT0915, DSP radio IC

Open Source Embedded IMU and Navigation Library

armapi API for ARM module (Sigfox/LoRaWan).

Node to connect BME280 Sensor to Homie-ESP8266

An awesome library for the 7 segment displays.

Library to handle the X-NUCLEO-IHM06A1 Motor Control Expansion Board based on the STSPIN220 component.

Imagen de logo de algo

Class for the RTC module.

Updated memory address #defines to avoid clashes with other libraries and f411re board defines

WebSocket Server and Client for Arduino based on RFC6455

SDFileSystem/LocalFileSystem等の不具合や機種依存性を少なくしたライブラリ。MiMic用

WIZnet PPPoE application library

Arduino library for scientific sensor readings/fusions/manipulations

Binary protocol manipulation

Unofficial repository for u8glib arm version

The library for the ALLBOT modular robotic system. Examples are provided for the VR204 and VR408 and many more

ServerConnect for RFID Project