LPS35HW pressure sensor library

Platform API for MINAR.

Example using DISCO L4R9I BSP driver files from ST Cube delivery

OpenIMU300 Base Library

CP866 for Cariad

Library to control I2C MPU6886

HT1621(TS119-5, TS174 )Library

A library to drive the RV-1805 extremely precise, extremely low power, real-time clock. The RV-1805-C3 from SparkFun is a very unique and exciting Real Time Clock. It is extremely precise (less than 7ppm per year!), extremely low power (less than 22nA!) and has all the necessary oscillators built-in making it small! The RV-1805 has not one, but two internal oscillators: a 32.768kHz tuning fork crystal and a lower power RC based oscillator. The RV-1805 can be configured to automatically switch between oscillators using the more precise crystal to correct the RC oscillator every few minutes. This allows the RTC to maintain a very accurate date and time with the worst case being +/- about 3 minutes over a year. The RV-1805 library operates the RTC at 22nA allowing for very long run times with very small backup power sources.

C library for simple Cron expression parsing. A 3rd level fork of the staticlibs/ccronexpr. This one I found to be more memory stable.

An Arduino library for controlling iPods (and some features for the iPod app on iPhones and iPod Touches) via the Apple Accessory Protocol (AAP)

Uses DMA to read/write SPI blocks, while putting the current thread in Wait state.

Tool for playing 8bit like music on Piezo speaker.

Convert osStatus to string

Arduino Library for the ESP8266 product family which partially implements the global cache irsend protocol found in their line of products

CAN library containing a CAN controller object handling a FIFO, and CAN peripherals attached to it.

Software UART program using Infra-Red LED and IR-Detector

A library for FaBo OLED I2C Brick. EROLED096 is 0.96 OLED module.

SMARTGPU intelligent embedded graphics processor, this library helps to communicate mBed with SMARTGPU dev board 2.4\" touch, excellent serial board that only require TX,RX, and Reset pin to mbed. Powerfull graphics and text processor with universal 4GB micro SD (FAT windows) format compatible. For detailed information visit: http://www.vizictechnologies.com/#/desarrollo/4554296549 www.vizictechnologies.com

SSD1322 oled driver library for 'monochrome' 128x64 and 128x32 OLEDs!

DTH22, RHT03 and DTH11 sensors can be read with this code!

A WiFi Manager for ESP8266 or ESP32 with OLED support. A easy to use WiFi manager with support for an OLED display, configurable through a captive portal

JSON parser, emitter, and JSON-RPC engine. Making microcontrollers connected via https://vcon.io

Infrared remote test functions (11/26/2010)

Software I2C Arduino library

BSP driver for DISCO_L496AG

Persistence of Vision (POV) made easy.

Forked from TFTLCD_8bit by Thiha Electronics

DC motor

Library for the SparkFun Qwiic Pressure Sensor - MS5637. The SparkFun breakout board for the MS5637 is a very sensitive, fully calibrated, low power, easy to use barometric pressure sensor capable of detecting a change of as little as 13cm of air! Great for weather sensing and local altimetry projects.

Get the fundamental pitch of an audio signal. Allows the Arduino Zero, MKRZero and MKR1000 to sample a generic input audio signal and get the fundamental pitch

espresso Library.

MCP3021 & MCP3221 Arduino library

This is a library to control DCC devices. Library version of the DCC++ work from Gregg E. Berman

Structure a collection numerical data to be sent through a stream into a well-defined packet. This library offers a convenient interface to build and send through an Arduino Stream up to 16 individual numerical values as part of a well defined general purpose data packet.

A library that provides tools to simplify MQTT discovery implementation for Home Assistant

Modbus485TH10S_TempHumSensor Sensor components for ardusensorplatform framework

Enables BLE connectivity on the Arduino MKR WiFi 1010, Arduino UNO WiFi Rev.2, Arduino Nano 33 IoT, and Arduino Nano 33 BLE. This library supports creating a BLE peripheral and BLE central mode.

Arduino library for reading multiple input devices of different types

Default mbed pwm doesn't have enough resolution at high frequencies, thats why I implemented VNH5019 Motor carrier with FastPWM.

CV7 ultrasonic wind sensor

ESP8266 library for writing Thingoo connected IoT devices

田中くんのモタドラを制御する石本さんのやつ

Displaytronic (Xiamen Zettler)'s I2C text LCD driver

Library to control I2C RTC

Arduino library for the calculation of ephemeris of the solar system with an Arduino Mega. This library can be used for calculation of ephemeris for the Sun, Mercury, Venus, Earth's Moon, Mars, Jupiter, Saturn, Uranus, Neptune. For each solar system object you get: equatorial coordinates (RA/Dec), horizontal coordinates (Alt/Az), rise, set, distance (in A.U), and apparent diameter (in arcminutes). Due to VSOP87 and ELP2000 implementation, code needs too much flash memory for classic Arduinos (Uno, etc).

Faster SPI library optimized for the Teensy 3.0

ver.beta0

NOKIA5110_TEXT is a light-weight library to display ASCII text on Nokia 5110 LCD PCD8544 controller. It displays ASCII Text and is designed for low memory footprint. 96 characters can be displayed with smallest font. Five characters can be displayed with largest font. Sleep mode included. 9 optional fonts of various sizes and styles, Inverse mode, contrast and bias control. Custom characters and bitmap display, Basic Graphics. Hardware or Software SPI.

Wrapper class for Serial to enhance layout of tabular data. Set flexible tab positions, repeating strings.

Macronix Low Power Serial NOR Flash in SPI mode.

A fully configurable NTC thermistor library.

A parametric EQ that uses a fixed point, direct form 2 transposed, implementation of a Butterworth filter. The following parameters can be adjusted: Gain (dB), Bandwidth Gain (dB), Centre frequency (Hz), Bandwidth (Hz), Order, Type (Peaking, Bandstop, Bandpass, Low Shelf, High Shelf, Low Pass or High Pass).

Utils Libraries for RemoteMe.org system. Libraries Utils will allows You to extend remoteme finctionality

nRF24L01+ library requiring very little code along with YouTube videos showing all available features. Send dynamically-sized data packets, with or without dynamically-sized acknowledgement packets, with much less complication than other libraries. The library also supports controlling the radio with only 2 pins on ATtiny and ATmega microcontrollers!

A library for SPI control of adafruit's neopixel ring and addressable LEDs.

M2X MQTT Client for ARM MBED

A simple API/Software interface to the LPC17xx PWM peripheral to provide control to up to six RC type servo controllers.

Simple WiFiManager for Blynk and Mega, UNO WiFi, Teensy, SAM DUE, SAMD21, SAMD51, STM32, nRF52, etc. boards running WiFiNINA shields, configuration data saved in EEPROM, FlashStorage, DueFlashStorage, LittleFS/InternalFS. Library for configuring/auto(re)connecting Mega, Teensy, SAM DUE, SAMD21, SAMD51, STM32, nRF52, etc. boards to the available MultiWiFi APs and MultiBlynk servers at runtime. Enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Static STA IP and DHCP Hostname as well as Config Portal AP channel, IP, SSID, Password can be configured. DoubleDetectDetector feature permits entering Config Portal as requested. Configuration data saved in EEPROM, FlashStorage, DueFlashStorage, LittleFS/InternalFS.

Arduino-Bibliothek zum Ansteuern des "Circios" Schulroboters. Angelehnt an den JavaHamster für einfaches Einführen von Robotern in der Schule, jedoch mit Möglichkeiten zum Erweitern und Basteln!

Adafruit driver converted to mbed.

Read PH with ESP32, ADC Adafruit ADS1115 and DFrobot SEN0161-V2 PH sensor kit

An Arduino library for driving HPDL-1414 displays using shift registers. An Arduino library for driving HPDL-1414 displays using shift registers, works with Open Source Hardware found here https://github.com/sqfmi/HPDL-1414-20x2-ESP32

Port of the Adafruit_IS31FL3731 library for Arduino. Enables control of the feather Charliewing LED Matrix peripheral board.Makes use of the I2Cdev library for I2C.

The file is divided on different sections in which are stored the key containing data. Here is an example @code [GENERAL] ;a section key1=data1 ;a key key2=data2 ;another key [DATA] ; another section key=dat ...=... @endcode @note The library uses windows end-line characters (cr+lf) for simplifying modification

An addon for ESP8266WebServer which makes common tasks for developing a rich REST API straightforward

This library allows communication with a FHEM Server. You can receive information and send commands through an HTTP client. Basic Auth (Username and Password) is supported and CSRF-Token support is also included.

Arduino Input Capture Library. This library is intended to attach interrupt on a pin for frequency/time sampling. Works on: AVR (using MsTimer2 lib), ARM (Due using DueTimer), ESP8266

Library that helps working with the Fernando K app. This library manages multiple client connections and inform about incoming messages through callback

Single instance HTTP Server using WiFly Interface.

Rev 0.1 Simple operation of just X, Y, Z values in floating point G's

VCNL4020, Fully Integrated Proximity and Ambient Light Sensor withInfrared Emitter, I2C Interface, and Interrupt Function

Takes user input, outputs pwm to current control filter.

Utility for running a piece of code at a set interval.

A program to find signal's TruRMS value

ok

Program made to control Dynamixel servos type AX-12W.Works perfectly in the lpc1768

<h2>pff library for Arduino avr MCUs. to drive SD cards</h2>. <p>This library is an optimized and fast SD library based on pff.h (PetitFS):</p> <p>https://github.com/greiman/PetitFS</p> <p>http://elm-chan.org/fsw/ff/00index_p.html</p>

RTOS enabled i2c-driver based on the official i2c-C-api.

ESP8266 User Interface Library. A Simple library that implements a Good Looking User Interface for ESP8266. It is Easy to Setup and Works side by side with your Sketch.

32bits encoder counter using 16bits TIM and a 32bits software counter

dualshock3

GoogleChart.

OneWire slave device emulator with support for up to 32 simultaneous 1wire devices. supported sensors: BAE910, DS1822, DS18B20, DS18S20, DS1990, DS2401, DS2405, DS2408, DS2411, DS2413, DS2423, DS2431, DS2432, DS2433, DS2438, DS2450, DS2501, DS2502, DS2503, DS2505, DS2506, DS2890

Comic for Cariad

A library that supports to use BLE to connect and cotnrol the wedo2.0. It has both support for sensors (tilt and detect) and actuators (motor, sound, led)

VGA signal generator for UNO and MEGA. Supports 120x60px 2bpp on Arduino UNO and 120x240px 2bpp on Arduino MEGA

A library for using a variety of air quality sensors. Part of the hackAIR project. (C) hackAIR Consortium, 2016. This deliverable contains original unpublished work except where clearly indicated otherwise. Acknowledgement of previously published material and of the work of others has been made through appropriate citation, quotation or both. Reproduction is authorised provided the source is acknowledged.

cooperative multi-task manager for Arduino

Ready for usage of this device:http://gadgetgangster.com/find-a-project/56.html?projectnum=322

Ultra fast and direct SPI library for some STM32 micros.

VGA dirver based on tiles (characters) for the STM32F103C (bluepill). The engine supports 8 colors and 224x240 pixels organized in 28x30 tiles.

Gyro Library for the Gyro Breakout Board - LISY300AL 300°/s from sparkfun

The FirmwareUpdater is a mbed firmware update library with HTTP server on cloud.

An Arduino library for the SHT21 / SHT25 humidity and temperature sensors.

watchdog library. this is a derived work.

Lib for Bulme Bertl

SparkFun Line Follower Array Library.based on https://github.com/sparkfun/SparkFun_Line_Follower_Array_Arduino_Library

NewTone library

Library for big numbers from http://www.ttmath.org/