fork of original freetronics library

Stepper motor control library for Arduino. Easy to use functions for controlling one or more stepper motors. Uses speed and acceleration control for smooth operations and faster rotations. Works with any drive electronics having a "step and direction" interface.

A driver for controlling Iridium 9602/9603 satellite modems for Short Burst Data transmissions

Arduino Library for Roboteq Serial Communication

Allow to use the built-in 16 bit Timer3

Class to drive a M24LR64 EEPROM with the STM32769I_DISCOVERY board. This EEPROM can be found on the additional ANT7-M24LR-A daughter board.

This is an Arduino Library for the AS3935 Lightning Detector by AMS. This library adds both I-squared-C and SPI functionality for the <a href="https://www.sparkfun.com/products/15276" SparkFun AS3935 Lightning Detector</a>. The library gives you the ability to read lightning, get an estimate on its' distance, check its' 'energy', but also to reject noise and false lightning events. It also provides functions to tune the resonance frequency of the antenna! The entirety of the library's functions are demonstrated in the provided example code, making it easy to understand and follow along!

With Serial Wire Output (SWO) an stm32duino can write tracing and logging to a pc at high speed. To use this library, you need a debugger probe to connect your arduino to your pc. Serial Wire Output only works on systems with arm processors, sorry.

ESP Generate QRCode for SSD1306, SH1106 oled displays, GxGDE0213B72B E-Ink display and others based on Adafruit ST7XX

lib_LCD_oem http://www.lextronic.fr/P764-afficheur-4-x-20-caracteres-retro-eclaire-vert.html YSI

FEPとdualshock3

PLANET-Q ES920LR Library

Arduino library to control Grove - High Temperature Sensor.

Create Touch Sensors with a single (Analog)Pin without external Hardware. This library uses the internal wiring of AVR microcontrollers to measure capacitance as described here <http://tuomasnylund.fi/drupal6/content/capacitive-touch-sensing-avr-and-single-adc-pin>

Allows control of Rokenbok Education ROKduino robotics system. Provides functions for light, bump, angle, and proximity sensor blocks, light and motor modules, ROK-star IR communication (transmit and receive), built-in LEDs and speaker.

Library to implement SCPI Commands on an application using NUCLEO 401RE.

Allows you to read the location from the GPS on your MKR GPS shield.

Library for converting Pt100 RTD resistance to Celsius temperature

DMA helper/wrapped for ATSAMD21 such as Arduino Zero & Feather M0

BigNumber library for the Arduino. A library for handling "big" numbers, similar to the "bc" program under Unix. Numbers consisting of large numbers of digits, and large numbers of decimal places can be manipulated, subject to memory limitations.

lib

Three-pin 640x400 VGA Console Mode

This Arduino library supports Simple Packet Coms for Esp32. This Arduino library supports Simple Packet Coms for Esp32

Arduino library that drives seven segment displays using CD4511B chips.

Arduino library to control 2.8 inch TFT Touch Shield v2.0.

Driver for Microchip's MCP9600 Thermocouple Amplifier. The <a href="https://www.microchip.com/wwwproducts/en/MCP9600">MCP9600</a> is an integrated thermocouple amplifier featuring a typical accuracy of ±0.5°C and a maximum accuracy of ±1.5°C, with support for many thermocouple types, conversion modes, and a configurable exponential moving average filter.

Library to easily communicate with XBee modules.

Lib to switch the clock speed of the ST Nucleo to 84MHz. The internal RC oscillator is multiplied with the PLL.

This library provides the configuration interface by serial. Settings are stored in EEPROM.

Graphics Library for the gen4-IoD by 4D Systems. This is a library which enables graphics to be easily added to the gen4-IoD modules using the Arduino IDE or Workshop4 IDE. gen4-IoD is powered by the ESP8266.

Bibliotek til HC-SR04 ultralyd afstandssensor. Du kan måle afstanden til objekter mellem 5 og 400cm væk. Det er også muligt at angive en rumtemperatur for at opnå større præcision .

ESP8266 RESTful HTTP Request Library

Class to add reset supervision with a watchdog timer functionality

ABUS Socket Communication library for PLCs (Cybro-2 and Cybro-3) from Cybrotech and ESP32 / ESP8266 over WiFi

A library that makes using mx1508 dual DC motor driver easier. I know how very little resource there are on this motor driver. A lot of sellers assume this IC is l298N but its rather much more like pololu DDRV8833.

Library to read and parse .ini files on ESP8266 and ESP32 platforms. SPIFFSIniFile is a library to read and parse .ini files as used by Microsoft Windows. SPIFFSIniFile is designed to use minimal memory requirements, and the only buffer used is one supplied by the user, thus the user remains in charge of memory usage. GNU LGPL v3

Use the Max Sonar EZ1 to measure inches, centimeters, feet and meters. Enjoy!

Arduino library for AMG88xx 8x8 Thermocouple Sensors. Arduino library for AMG88xx (especially AMG8833) 8x8 Grid-eye thermal camera sensors that use I2C

Filter library for Arduino. Supports IIR and FIR filters with many different implementations, Direct Form 1 & 2, BiQuad, Second Order Sections ... Supports Butterworth filters etc.

Tests for the NetworkSocketAPI

library using mahony's algorithm for 9dof

Arduino library for driving a VID28 or equivalent stepper motor.

implement LPC1768 GPDMA API

Handle CapacitiveButtons, powered by the CapacitiveSensor library

rosserial library for mbed Inspired by nucho's rosserial library This library is still under development

A simple CyaSSL-based HMAC-MD5 implementation.Licensed under GPL v2.

TMP175 Temperature Sensor

CN0391 4-thermocouple shield driver

Library containing functions for SparkFun Graphic LCD Serial Backpack

DSHOT150 algorithm using digital IO pins on the LPC-1768

Articulated Library. The articulated library implements the calculations necessary to solve a triangle or quadrilateral articulated in 2d or 3d. They are designed to simplify the control of articulated robots (robotic arms, quadrupeds, Hexapods, Bipeds...)

Racing Robots Session

grove_esp8266

Library for the ProtoCentral MAX30003 Single lead ECG breakout board. The MAX30003 chip from Maxim is a single-lead ECG analog front-end, which also includes R-R (heartbeat) detection.

HTTPClient with increased vector for sites with long parameters

A small command-line library to make development easier. cmdArduino allows you to interactively call functions from a serial command line for fast testing and debugging.

The MLX90393 is based on the Hall-effect and the patented Triaxis® technology from Melexis. The output signals (raw X, Y, Z Magnetic data and Temperature data) will be provided through ...

Makes fading LEDs easy. Makes it possible to easily fade LEDs on the hardware pins of Arduino (even with gamma correction). Simply set the fade time (individual for each LED) and brightness to fade to and the library does the rest.

The Codec2 library is a proof-of-concept for running the Codec2 audio codec on an Arduino-compatible Adafruit Feather nRF52 Bluefruit LE board. Codec2 is an open source speech codec designed for communications quality speech between 700bps and 3200bps. The main application is low bandwidth HF/VHF digital radio. It fills a gap in open source voice codecs beneath 5000bps.

EEPROM wrapper for ESP32 that handles partition rotation

Current and Seven Day Weather Forecast Library for Arduino. This library depends on HTTPClient and ArduinoJson.

Arduino/PlatformIO library for generating LED "hand" positions for an analog clock with binary hands.

A common library used by Digi International Inc. mbed libraries to output debug information.

Library to generate Time-based One-Time Passwords. Implements the Time-based One-Time Password algorithm specified in RFC 6238. Supports different time steps and it's compatible with tokens that uses the same standard (including software ones, like the Google Authenticator app).

Tools for easier usage of PubSubClient. Provides useful tools for PubSubClient, however they may consume more power and storage. Therefore it's recommended for powerful microcontrollers like ESP8266.

Arduino library for Dynamixel

Arduino library for controlling Soccer Robot by Peanut King.

Ubidots library for the Adafruit FONA

True color TFT and OLED library, Up to 18 Bit color depth. Supported display controller: ST7735, ILI9163, ILI9325, ILI9341, ILI9486,LD50T6160, PCF8833, SEPS225, SSD1331, SSD1351, HX8352C.

mbed allocator api

blink

A very simple software SPI library for the MAX32630FTHR board. It was designed to support the max31865 and RadioHead libraries I ported for my Rocket mbed project.

Arduino library for Texas Instruments HDC1080 Low Power, High Accuracy Digital Humidity Sensor with Temperature Sensor

Exchange structured data between Arduino boards

This driver is meant for the monochrome LCD display (model no: LS013B4DN04) from Sharp; but it should be easily adaptable to other Sharp displays.

Library for the SparkFun Micro OLED Breakout

VGA8x16 for Cariad

AtariButtons for Cariad

A portable graphical and character user interface (GUI+CUI) library for embedded systems. Uses the u8glib library.

Arduino library for the ThingsESP Platform. The ThingESP Arduino Client Library is an easy to use client library to connect your IoT devices to the ThingESP Cloud Platform. This is a library specifically designed for the Arduino IDE, so you can easily install it in your environment and start connecting your devices within minutes. It supports multiple network interfaces like Wifi. So you can use it in several devices like Any ESP8266 variant like NodeMCU, etc.

Exemple de classe

Simple & intuitive way to drive various smart LEDs on ESP32.

SnakeLights library for snake wired NeoPixels. This library supports the build-with-love SnakeLight NeoPixel LED array

Allows an Arduino/Genuino board to interact with an NFC controller through the NFC Forum NCI standard (NFC Controller Interface). With this library you can detect, or read, or write NFC tags, start a peer-to-peer communication, or enter the card emulation mode.

Motor control using ESP32 MCPWM. To control up 2 DC motors

An Arduino library with additions to vanilla Serial.print(). Chainable methods and verbosity levels. Suitable for debug messages.

Provides VGA, Game Controller (NES, SNES), Audio support for the ESP32. The graphics engine supports sprites, animations and 3d meshes.

CP850 for Cariad

A hardfault handler to dump useful registers to aid debugging of program exceptions. Often knowing the ProgramCounter (PC) at fault time is enough to find a useful location in source code.

Diode-multiplexed keypad support for Arduino

Quick sample to return float temp in C.

A small library that's provide helpers for programmers

PLANET-Q INA226 Library

A simple IoT Platform for the Amazon Alexa Speaker

Simple CoAP client/server library for generic Arduino Client hardware. This CoAP library support simple request/response message.

Library to interface H3LIS331DL accelerometer.

Arduino Library for esp32 lilygo-ttgo-t-display LCD display used to log data on screen

Library for the BNO055 as easy to use compass. Made for use in Robotics (RoboCup Junior).

Device interface library for multiple platforms including Mbed.