A concise api for using pin management with fast mode

Discrete RGB colour sensor using a colour LED flashing at high speed and a monochrome LDR (light dependent resistor) for detecting the colour via ADC conversion.The library implements interrupt driven ADC conversion at high speed (370 RGB readings per second, 128 times oversampling per channelfor noise reduction).The detection can optionally run in background.

Easly connect your Arduino/Genuino board to the Arduino Cloud

Tempareture sensor driver edit Original maker zchen311

adds two numbers and outputs to binary on led. Use terminal serial connection (COM#) to input

mbed library to connect to rfduino

Lab4 RTOS

class virtual touch

Schedule alarms to occur at specific times

A library for interfacing with CC1101 transceivers.

tone function Library

Arduino library for the Texas Instruments PCF8575C 16-bit I2C I/O expander. The PCF8575C provides general-purpose remote I/O expansion for most microcontroller families via the I2C interface serial clock (SCL) and serial data (SDA).

This is a simple current and voltage sensing library for the INA219 high-side Current Sensor. LapINA219 provides basic current, voltage, and power monitoring, with a current resolution 0.1mA, maximum bus voltage of 16V, and maximum bus current of 400mA. It is designed to monitor a project's power, and is small and lightweight. There are other more complex libraries available if you need more control over the setup.

Arduino library to control Microchip HV518. Control VFD or Nixie displays using one more more HV518s.

PWM制御

Arduino library to control Grove 3Axis Digital Accelerometer ADXL345. This is a high resolution digital accelerometer providing you at max 3.9mg/LSB resolution and large ±16g measurement range.

DCF77 decoder with excellent noise tolerance. Attention: this library requires a crystal based Arduino. Read the Hardware Incompatibilities Section of the documentation for more details.

Allows an Arduino/Genuino board with USB capabilites to act as a Keyboard. This library plugs on the HID library. It can be used with or without other HID-based libraries (Mouse, Gamepad etc)

An oled ssd1306 clock which syncs using ntp.

The Library implements a set of methods for working with an axis joystick controller. Dual axis XY joystick module reading.

Breath LED that turn on/off or loop the brightness smoothly.

DISCO-F469NI_Button_and_Slider_Library v1.0

A fast TFT library for Arduino AVR processors (UNO, Mega, Leonardo, Pro Mini etc). Supports TFT displays using the ILI9341 driver operating with hardware SPI.

ID12RFID library, quickly modified to use interrupt driven reception instead so it doesn\'t block

Library for handling multiple buttons with single analog pin for ESP32. **Note: A upgrade library "ButtonFever" has been released to provide much powerful features to handle various button press event for both standalone digital button and button array. Please try it!** It will trigger callback function upon button pressed. The library handled button debouncing, and you may decide the trigger edge for button event - on press (default) or on release.

CN0397 (Smart Visible Light Detection)

Handle PushButtons, debounced using the Bounce2 library

OpenAg driver for the Atlas Scientific light spectrum and intensity sensor

Library for a memory efficient DistanceTable for Arduino.

Contains added code for stm32-L432KC compatibility

Using std::ostream with TextLCD

A library to parse and create Maerklin CAN packages

Connect a device to the Cayenne dashboard using MQTT. The Cayenne MQTT Arduino Library provides functions to easily connect to the Cayenne IoT project builder. This library bundles the Eclipse Paho MQTT C/C++ client library for MQTT support. http://www.cayenne-mydevices.com/

Arduino library for the MCP9808 sensors in the Adafruit shop

Library for ESPectro32

Multichannel YHDC SCT-013 Current Transformer Sensor library

The GPIO card library

First version of my PPM library.

This library allows any user to use their Mbed project with a transient energy source( e.g. windturbine, solar power).

The Arduino Science Journal firmware for the Physics Lab kit and the Arduino Nano 33 BLE Sense. This library depends on the ArduinoBLE and MKRIMU libraries.

library for driving character LCD in 4-bit mode (HD44780, ST7066U & compatible) supports 16x2, 20x2, 20x4 & 40x2 uses R/W pin for timing rather than delays

increase ITD queue count.

Library for the Sensirion SGP40 air quality sensor. The SGP40 is an indoor air quality sensor equipped with an I²C interface. This library uses Sensirion’s powerful VOC Algorithm to translate the sensor's raw output signal into a VOC Index as a robust measure for indoor air quality.

Toshiba TA8428 fullbridge motor driver IC driver for mbed.

Arduino library for the MiraOne radio module by Lumenradio AB. A library for using the MiraOne RF module over a serial port.

this library helps you for using Local File System

StateMachine Library. The StateMachine library implements a state machine that can run on a processor like Arduino

Output library for Arduino. Output library supports HIGH, LOW, TOGGLE, BLINK_WITHOUT_DELAY. It is easy to use with multiple output pins to control multiple LEDs, relays... It is designed for not only beginners but also experienced users

Library for debouncing

Arduino library for SPI AD5204 and AD5206 digital potentiometers

OpenAg driver for the MH-Z16 NDIR CO2 sensor

FreeMASTER library, Realtime monitor - debugger, data visualisaton

a library to use DS1337 as RTC

A library package for interfacing the microcontroller with VITCON Link modules. This is a peripheral driver library for Modlink hardware modules example.

Read data from accel, gyro, and mag of gy80

Signal K hardware sensor development library for ESP devices

Template for building custom designs for XLR8. Use this template to create a build directory for XLR8 designs using the Alorium Technology OpenXLR8 flow

A basic LTTO compatible Lasertag IR library with simultaneous Tx/Rx

Library for the MAX86150 PPG and ECG sensor module breakout board. Arduino library for the MAX86150 PPG and ECG sensor module

Fork of mbed-src file paths change. LPC1114FN28 use only.

A u-blox GPS library for M8 modules optimized for time and date applications

Simple transmit example for B-L072Z-LRWAN1 board, Murata TypeABZ

MtSense01 Easy use interface

Bare Metal Library for Atmel AVR

A fast TFT library with fonts for the Arduino Due. Supports 16 bit parallel TFT displays using the HX8357B, HX8357C and ILI9481 driver.

class of SBUS

Easy Access to lots of RGB-LEDs. TLC5957 is a 48-channel (=16*RGB) 16bit LED-Driver with high PWM-Clock and data-update rates possible. Intended Usage is for Signage/Outdoor Displays. This library tries to make it easy to use.

Acorn for Cariad

This library enables you to use Interrupt from Hardware Timers on an STM32-based board. It now supports 16 ISR-based timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware timers, using interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's necessary if you need to measure some data requiring better accuracy.

This is the Arduino library for the MOVI(tm) Voice Dialog Shield for speech synthesis and speech recognition on Arduino boards. The library makes it easy to control most of MOVIs speech recognition and synthesis features across different Arduino platforms. The library is highly recommended but optional as MOVI can be controlled through a low level serial interface.

NHD SPI LCD Library Code Rev 0.0

Rosie Gillman

filter for imu

A library for generating PAL or NTSC video output with an AVR. Supports PAL and NTSC with the max resolution of 128 times 96 pixels.

配合可控Ctrl APP的Arduino库

Har sett det snart er norsk eksamen, så øver meg ved og skrive noe inni helvetes mange kommentarer bare og kose seg med masse god lesestoff om alt mulig rart :)

softwarePWM by ticker, timer

Analog-to-binary input with hysteresis

USB debug tool for STM32F042F6P6

IQRF library fror Arduino

KeyboardManager: a class to manage the polling of a switch-matrix keyboard

MAX17055 driver

Library to use SPI interfaces through SPI XBs. Adds functionality to use the configurable SPI XBs on an Alorium XLR8 board as extra SPI interfaces. Adapted from Arduino's standard SPI class.

A colorful version of tetris.

Tachometer library

Fast and simple communication between Matlab and MCUs such as teensy, arduino, esp.... This is the C++ code for the MCU, not the Matlab side...

Bufferless implementation of the Teleinfo protocol for Arduino.

Update ESP8266 devices using Deploy the Fleet service. Allows you to manage and deliver OTA firmware updates securely.

Streaming C++-style Output with Operator <<. Streaming C++-style Output with Operator (orignially from Mikal Hart http://arduiniana.org/libraries/streaming/)<<

Make your system to display messages by LED blinking. Your on board LED can display a lot of useful messages

Extracted functions of the library CMSIS-DSP.

Library for 16 channel PWM servo driver PCA9685. v2

Usada bajo permiso del autor tony63

This is a library to use the socket using BP3595(for STA mode). This library only works with GR-PEACH. It is necessary to import EthernetInterface library to use this library.

Allows communication with WiFi network for all Arduino boards. This library allows an Arduino board connect in WiFi network easily

bit_test_class

Simple pH class.

BSD style socket API for W5500.

赤外線リモコンの受信をパルス幅にて行います。Displays the pulse width of the IR control.