ESP Library to simplify OTA setup.

Library for handling ILI9163 - based LCD displays.

"A simple state machine implementation.". A state machine is implemented by defining state logic as a function in your sketch. Transitions are implemented as functions returning a boolean value and a next state number. Requires LinkedList library https://github.com/ivanseidel/LinkedList.

A library for checking keyboard events like whether a key is pressed or released. Listens the input from keyboard which is attached to board and provides necessary functions to handle it.

Library for emulating an Xbox controller over USB. Requires a compatible board configuration with the proper USB descriptors.

L3GD20 Library using FIFO and Interrupt

Advanced webserver for Arduino. Compatible with many network interfaces. Webpages can either be embedded in the code and/or stored on an SD card (with long filenames!). Supports GET requests and allows easy embedding of dynamic contents.

DHT sensor library for ESP32 using the RMT peripheral

LCDモジュール ACM1602NI（I2C接続） を制御するライブラリ

Azure IoT common library

A library to manage periodic schedules..

Frequency Counter Library. Only for mbed LPC1768, mbed LPC1114FN28, Nucleo-F401 and Nucleo-F411. No way to change pin assign.

Blinking LED example for LPC55S69

A library that allows for easy parsing of POST packages.

Menu creation Arduino library for LCDs, wraps LiquidCrystal. LiquidMenu wraps the Arduino's LiquidCrystal library with the ability to create menus. It simplifies the menu creation process by abstracting the elements of a menu into hierarchically organized classes.

An Arduino Library Specifically for the ESP32. Optional TwoWire reference. Handles Wire.h stop command correctly.

Arduino Library for AIS NB-IoT Shield

Biblioteka za magnetometar QMC5883L

Arduino library for the VEML7700 sensors in the Adafruit shop

Helper for ESP8266 that orchestrates WiFi connection and OTA updates. This library contains a simple helper that you can orchestrate WiFi connection via SmartConfig and Arduino IDE + HTTP OTA update features all together.

Arduino library for ES920/ES920LR FSK/LoRa wireless module

TweetNaCl (http://tweetnacl.cr.yp.to/) is a minimal, safe, and easy to use cryptography library. Repackaged here for easy use on the ESP8266 platform.

Testing 6DOF USB HID joystick device.

Commands in form of sequence for ESPTerm

A library for the APDS9960 sensor. allows to read gestures, color, and proximity on your Arduino Nano 33 BLE Sense board and other boards with sensor attached via I2C.

Library for "I2C 8x8 LED matrix board" from Switch Sciencehttps://www.switch-science.com/catalog/2071/

Module for PluggableUSB infrastructure. Exposes an API for WebUSB API.

Hardware aided timer array for STM32 boards

Interface library for the Devantech SRF02/SRF08 ultrasonic i2c rangers. Depends on I2cRtosDriver lib!

Measure frequency of analog captured signal connected to an Arduino and check for noise and mute.<br/>. Signal can be delivered e.g. by a microphone. Tested for UNO, Nano and ATtiny85.<br/>Examples includes a whistle switch (Pfeiffschalter) designed to react to human whistling.<br/>The ATtinySerialOut library is required for print functions on ATtinies.<br/><br/><b>New:<b>Renamed doPlausi() to doEqualDistributionPlausi(), added plotter output of input signal.

This library eases the storage of variables in reset-safe RTC memory. Variables stored there survive all kinds of resets as long as there is no hard reset. It provides boilerplate code to securely store relevant state data in RTC memory so it may survive (unexpected) reboots or deep sleeps. Supports ESP only at this time, will change in the future.

Radio communication with NRF24

Required for communication with Virtuino app.

Fork of mbed-NTP Library with small fixes

This library lets you connect an MRF24J40 tranceiver to your mbed. The MRF24J40 is intended for use as a zigbee tranceiver. However, it can also be used to simply send data from one tranceiver to another. The tranceiver is also available as a module on a small PCB with antenna etc. It requires no other components and can be connected to the mbed using 5 pins.

Reconsidered input pin and NC pin for SPI. Modified several functions interface and its contents.

library for Seeed's Grove - 4 Digit Display

Library for LIS2DH12 acc.

Arduino board accesses OBD2/J1939/J1708 Data by DFL168A Integrated Circuit Chip. Most methods are unblocked. With this library you can use the Arduino board and DFL168A IC from Dafulai Electronics to get vehicle data easily

An eddied version of http://mbed.org/users/crazystick/code/DHT22/ for LPC11U24. All printf statements are removed and features requiring the real time clock are removed.

Light weight homie v3 (MQTT) Library for ESP8266/ESP32

Driver for Microchip Technology Inc. 23LC (23LCV, 23A, 23K) SPI SRAM chips for AVR, SAM3X (Due), and SAM M0+ (SAMD, SAML, SAMC) microcontrollers. Supports 23LCV1024, 23LC1024, 23A1024, 23LCV512, 23LC512, 23A512, 23A256, 23K256, 23A640, 23K640 with byte and block transfers.

This library is designed to make it easy for anyone to get the Nokia 5110 84x48 display 3.3V module up and running without delay It provides a convenient interface for printing single characters or strings of characters and vertical bar graphs, all at various magnifications. It is free to use and modify. I accept NO liability for malfunctions or damage caused by this software I hope it is useful to the community and am open to suggestions for improvement.

64x128 Graphic LCD Library

Simple, generic menu system usable with any displays.

geometryfuncs for ICRS eurobot

Data sample and LCD plot

Arduino light streams

I2C device discovery and printout of known device names

Common functionality intended for avr-based mobile robotics and related firmware.

pick up wakaama files from https://github.com/eclipse/wakaama

Modbus Library for Arduino (Serial)

ver:init

ADXL362 accelerometer library

Asynchronous UDP Library for STM32 using built-in LAN8742A Ethernet

Library and Sample of ECHONET Lite for Arduino. This is the ECHONET Lite protocol library for arduino and a sample.

myi2c test

Driver library for ST7565 graphics LCD controller over SPI interface.

The PWM library using the "Reset-Synchronized PWM mode" of "multi-function timer pulse unit 2 (MTU2)".

7-segment display with shift register. Common anode/cathode, any (eh, sort of) number of digits. Kind of framebuffer. Display has to be connected thru shift register, e.g. 4094. More details and picture in header file.

Arduino Library for UART control of the Adafruit Soundboard

Arduino Library for Adafruit Flora Pixels

High speed analog input class.

Ethernet Network Library

A tiny library to drive the Bosch BME280 Altimeter and Pressure sensor. This library aims to minimize the memory footprint in order to use it with tiny MCUs (like Atmel ATtiny85/84).

Adafruit-GFX porting for mbed OS6. Needed to add #include "Stream.h" in beginning of the Adafruit_GFX.h

A generic library to support Max7221 chip for 8 digit 7 segment displays

A library for Qchip based board. Made for Qchip MCU

A set of wrappers for easier sensors management.

Common stuff for all my devices' web server pages: css, login, log, ipv4, ipv6, firmware update, clock, reset info etc.

Arduino Library for gaining as many input and output pins as necessary by making use of shift registers. Supported ICs are: SN54HC165, SN74HC165, SN54HC595, SN74HC595 and similar 8 bit ones.

Universal function object library that is good enough as the replacement of the missing std::function in Arduino

http://ndevilla.free.fr/iniparser/ Welcome to iniParser -- version 3.1 released 08 Apr 2012 This modules offers parsing of ini files from the C level. See a complete documentation in HTML format, from ...

This is a library for the Adafruit CCS811 I2C gas sensor breakout. CCS811 is a gas sensor that can detect a wide range of Volatile Organic Compounds (VOCs) and is intended for indoor air quality monitoring.

Simple RPG Library

CAN Bus library for MRMS mrm-col-can. CAN Bus connectivity and local functions exposed via CAN Bus for 6-color sensor

WS2812B (Neopixel) library. WS2812B (Neopixel) library for STM32F1 LibMaple

Library that to count pulses by hardware

Simple counter class, non-volatile between resets and power on/off.

Arduino library for DS1821 temperature sensor

A utility library for Arduino that gives some easy methods for a LED

An Arduino library to deal with PCINT (Pin Change Interrupts).

This library includes drivers for ST S2-LP sub-1GHz transceiver. This library is built for STM32 microcontrollers and comes with an example of implementation of the S2-LP driver.

Update FTPClient

A library made for the Ramps 1.4 shield.

Library for MPC3424, it's my prototype library. work good.

Library to emulate Amiga Mouse or joystick

BT Interface, UART

Library for Honeywell HIH6130 Humidity and Temperature Sensor

Control multiple I2C OLED displays. Supports a combination of multiple bit-banged buses and addresses to handle any number of displays.

A fully implemented LinkedList (int, float, objects, Lists or Wales) made to work with Arduino projects

Wio 3G and Wio LTE M1/NB1(BG96) boards driver.

This library provides an interface for Infineons DC Motor Control Shield with TLE94112EL. This shield provides 12 half-bridges which can drive up to 6 indipendent (+5 cascaded) bidirectional motors consuming up to 0.9 Ampere each

NeoPixel library for SPRESENSE (Arduino)

シリアル通信ようのライブラリです。charとfloatのデータを送受信できます。

Asynchronous control of Lynxmotion LSS smart servos. The goal of this library is to provide performance when controlling a significant number of servos on a bus using a Orient => Action => Query/Update loop. It is capable of queueing up a number of servo query requests for multiple servos at a time.

OpenAg driver for the GC-0012 CO2 sensor

Library for the SparkFun Qwiic RFID Reader. The SparkFun Qwiic RFID Arduino Library makes it very easy to use the Qwiic enabled I-squared-C RFID reader from SparkFun Electronics. The <a href="https://www.sparkfun.com/products/15191">SparkFun Qwiic RFID Reader</a> can hold up to 20 scanned RFID tags and their associated scan times at a time. The library gives easy to use functions that allow you to get a scanned tag, get the tag's scan time, or get all 20 available tags and their scan times at once. Also provided is example code to demonstrate each available function.

Wifi driver for DISCO_L475VG_IOT1A es_wifi (Inventek Systems ISM43362-M3G-L44 )