File Config for Ethernet connection

Ultra Low Power 3D magnetometer. This library provides Arduino support for the Ultra Low Power 3D magnetometer IIS2MDC for STM32 boards.

A toplevel client library for aliyun MQTT messaging. 此库可以帮助你快速连接阿里云 IoT 平台，通过和阿里云物联网开发平台配合，可快速实现各种硬件应用，包括了很上层的封装，无需自己解析数据体，绑定事件即可。

Used with KL25Z Freescale board to access the Avnet Wi-Go Battery charger

Driver for Texas Instruments TLC5615 10-bit DAC. The TLC5615 is *the cheapest* percision DAC available on TI's website, available in a breadboard-friendly DIP-8 package, and it is fairly simple to use (and being a resistor string DAC it can double as a digipot with one terminal permanently grounded.) The current version of TLC5615 library requires the latest version of SPI library to work.

Xbee API library with support SPI connection. (use only SPI supported model. see also http://www.digi.com/support/kbase/kbaseresultdetl?id=3362 )

LM35 sensor

Library for the ProtoCentral ADS1292R Shield/Breakout board. Measure ECG and respiration using the ADS1292R-based shield/breakout boards from ProtoCentral

A library to wrap the Tindie API (supports ESP8266/ESP32 & others)

Port of the SHT2x example code from Sensirion

a library for TI's TMP102 temperature sensor.

This is lab2 of 4180 dealing with the extra parts kit.

EnOcean USB400 Serial Library

1

Direct conect sample

small library for the ble setup

digital temperature sensor. This library provides Arduino support for the digital temperature sensor STTS751 for STM32 boards.

Almost identical to USBHostShell; reads all endpoint descriptors

A small library to read the tempature from ds1621(with little changes all those ds162x) devices over I2C.

Library for communicating with Analog Microelectronics AMS 5915 pressure transducers. This library supports I2C communication with the AMS 5915 retrieving pressure and temperature data at rates up to 2 kHz.

Allows to control the MiniSys educative system. This library allows you to control every device of the MiniSys educative system. This is part of the subject called Educacion Tecnologica II at ORT Belgrano.

It is simple to use PCF8591 Library (ADC / DAC converter) for LPC800MAX

Library for Seed Groove Ultrasonic range / distance meter. See also https://github.com/Seeed-Studio/Grove_Ultrasonic_Ranger/blob/master/Ultrasonic.h and http://www.seeedstudio.com/wiki/Grove_-_Ultrasonic_Ranger

Bleeding edge development version of the mDot library. This version of the library is not guaranteed to be stable or well tested and should not be used in production or deployment scenarios.

Portal for configuring ESP32 via web interface.

blinking led

kl43z compatible

Removed blocking keepalive code

Communicate with Viessmann boilers using the optolink for ESP8266 and ESP32

Arduino library for use with RoverWing, a robotics expansion board for Adafruit Feather boards. RoverWing provides motor drivers, Inertial Motion Unit (IMU), and connection ports for servos, sonars, GPS, and other peripherals commonly used by small mobile robots. It also contains a microcontroller preloaded with firmware to control these peripherals, which communicates with the Feather board using I2C protocol, thus freeing resources of the Feather board for other purposes. This library allows easy access to all RoverWign features.

Maxim Integrated 7-bit Sink/Source Current DAC. DS4424, DS4422 input/output current Digital-to-Analog Converter Driver/library code.

Simple library for controll a matrix of 7 segment displays. It also support the Hexadecimal and the Decimal visualisation.

Arduino library for easy communicating with the MPU6050. It can get accel, gyro, and angle data.

Allows controlling the ST X-NUCLEO-NFC04A1 expansion board. This library provides the drivers and a sample application to control ST X-NUCLEO-NFC04A1 expansion board

The BERG Cloud connection library for mbed. This works in conjunction with the BERG Cloud Devshield available via http://bergcloud.com/platform/devkit/

A driver library for the AMG8833 sensor. This library allows an Arduino board to communicate with the AMG8833 sensor. Interrupts are supported.

Save config options to EEPROM as a JSON documrt

This is a library for the Adafruit APDS9960 gesture/proximity/color/light sensor.

Driver for SST 64Mbit flash (8Mbyte) model 25VF064C including higher level methods for rewrite and buffered read/write to help optimize I/O. Can also work with other 25 series flash and eeprom devices, requiring minor revisions for their capabilities.

version fonteh text LCD library to drive the winstar 16x2 oled unit, allowing access to setting custom characters.

Arduino library to control Cubic CM1106 I2C

MATSU-bed(LPC1549)でPWMを4つ以上出すプログラム

MatrixVoice HAL library. ESP-IDF components

An i2c version of mbed LIS302 Accelerometer Library by sford, cstyles, wreynolds. The return data is raw yet. It seems from -0x55 to 0x55 though I think it returns -0x7F to 0x7F. Humm... Why?

HDC1080 Digital Humidity | Sensor From Texas InstrumentsI2C Based

A library that provides communication functions conforming to UECS, a common standard for horticulture in Japan. This library provides UDP server and Web server function conforming to UECS standard. It corresponds to Arduino UNO or MEGA. Always requires Ethernet shield2.

Sensor library

This library is used to control one or more stepper motors from an ESP32 device. It is based on the FlexyStepper library by S.Reifels but provides some additional functionality

Bluetooth LE Mouse library for the Arduino Boards with BLE support and running mbed OS.

This is the library that be used in www.mfuthings.com which belongs to Mae Fah Luang University

Arduino library for behavioral task controls in cognitive psychology and neuroscience. This library provides several functions and utilities for implementing behavioral tasks in cognitive psychology and neuroscience. You can download and use latest cgnuino library freely from Library Manager on Arduino IDE or GitHub.

Library for Yamaha YM2413 sound synthesizer. Library to implement basic functionality for managing for Yamaha YM2413 sound synthesizer chip

A library that makes easy to use button with debounce. Make easy to use button with debounce.

Never actually tested in practise

The AD8556 is a zero-drift, sensor signal amplifier with digitally programmable gain and output offset.

Execute routines to specified schedule. A simple library to execute stuff to a schedule. Really easy to use and lets you set up repetitive tasks as well 'one shot' tasks to run at some point in the future. Quickly eradicate timing messiness in your sketches without the trickiness of interrupts. Works at ms to multi-second precision.

Textile sensor

pilight 433.92 MHz protocols library for Arduino. With this port of pilight 433.92 MHz protocols, you can transmit, receive and parse all 434 MHz protocols (e.g., rc switches or weather stations) supported by pilight. This should help to implement IoT bridges between the 434MHz-RF band and internet protocols. It is developed and tested on ESP8266.

Arduino Library for simplyfy command exection and other sensor and serial port related tasks

DigitalPin Sensor components for ardusensorplatform framework

adding additional features

Arduino Library for PCF8523 Real-Time Clock. Library for controlling and configuring this Real-Time Clock

Library for HM compatible devices on base of Arduino Hardware

Connects Arduino using Arduino Ethernet-compatible shields including the Ethernet Shield and WiFi Shield. You can use this library to connect your Arduino project directly to a MySQL server without using an intermediate computer or a web- or cloud-based service. Having direct access to a database server means you can store data acquired from your project as well as check values stored in tables on the server. This also means you can setup your own, local MySQL server to store your data further removing the need for Internet connectivity. If that is not an issue, you can still connect to and store data on a MySQL server via your network, Internet, or even in the cloud!

AIO Modules for ESP8266 and Arduino.

Enbedeed f7 ethernet for project

Arduino library for hardware accelerated floating point math. Takes advantage of hardware acceleration available in Alorium Technology's XLR8 product.

Framework for reading and writing variables in real time on any MBED platform.

Simple mbed library with macros

C++ type manipulation language

Driver for the Seeedstudio RGB OLED module for the xadow M0

Library for Siemens SDA5708 8 digit LED matrix display. The control interface is SPI.

A library to make developing ESP32 devices easy. Includes LoRa, BLE, OTA and general Utilities.

A Ton (Timer On) is used to provide an \'on delay\' system so as to avoid using wait()

All in one library to run qfixSoccerBoard code on the Arduino. This library was written for the SIA 2017/2018 to port qfixSoccerBoard code to the Arduino-World. Additional hardware required. The WIKI-Page is located here: https://eaglesia.github.io/eBoard/index.html

Persistent event driven variables aimed at making complex designs much simpler. Feature Variables are designed to be persistent event driven variables that not only offer the standard method of working with variables, but also handle the complexities of storing and checking variables a thing of the past.

EMoRo robots are interesting didactic kits encouraging the development of logical thinking and technical spirit.

Library for the SparkFun ESP32 DMX to LED Shield. An Arduino Library for the ESP32 DMX to LED Shield. Accomplishes DMX communication over Serial

Library to control and transfer data from NXP SGTL5000. As used on the Teensy Audio Shield. It uses DMA to transfer I2S FIFO data.

An Event-Manager for Touchscreen with XPT2046 requires XPT2046-Touchscreen library. This eventmanager detects the events click, double click, long click, swipe, touch down, touch up and draw. On any of these events a callback function ncan be registered. The parameters to define how to detect the events can be modified.

A basic implementation of Kalman Filter for single variable models.

A library for the Atmel touch sensors. allows you to read touch sensors values from your Arduino SAMD boards with touch sensors connected. Microchip Technology Inc., provides the Microchip Touch Library software subject to the license terms contained at the link below.  By using the Microchip Touch Library, you acknowledge and agree to the terms of the license contained at the link below.

Intermediate printing class for reducing the number of writes. Dramatically improves performance on IoT-type devices.

PS2 library for Adafruit capacitive trackpads

neural network trained with sine, sq, tri waveforms

Updates to follow mbed SDK coding style guidelines.

Allows for servo-like functionality for finger control. For Atmega 2560 (Almond PCB) and Arduino Zero (Chestnut) only. This library is created and maintained by Olly McBride on behalf of Open Bionics. It has been designed to be used by the Open Bionics Beetroot Hand Control software, used for the Brunel Robotic Hand.

Library implementing the TextDisplay interface for the Serial LCDs as sold by Sparkfun etc...

Socket interface for C027Interface. Implements the NetworkSocketAPI

Silicon Labs Si7210 device driver: I2C Hall Effect Magnetic Position and Temperature Sensor

Arduino/ESP library for Constellation 1.8. Arduino/ESP library for Constellation 1.8. This library use the Arduino JSON library (https://github.com/bblanchon/ArduinoJson) (version 5.x) to encode & decode JSON.

Useful Arduino Library for creating C# style buttons

Use FixedPoint_LUT to replace highly runtime intensive calculation times. FixedPoint_LUT uses LUTs to search for values in an array and make simple calculations rather then calculate complex mathematical functions

USB tiny disk

MPU6050 DMP Library

fota lib for mdot

Arduino library to control Grove Gesture（PAJ7620U2）.

rtos

mbed utilities library