Adeon is a software solution for controlling GSM devices (GSM gates, relays, modules etc.) via SMS commands. It consists of two main parts – Adeon mobile app available on Google Play and this library for embedded development kits. Adeon app allows users to create a list of GSM devices with predefined commands. These commands can be sent in form of SMS message to the target GSM device and thus control its behaviour, e.g. switch on / off a relay, open / close a gate, de/activate alarm etc. The library for Arduino provides user an API for receiving commands from the Adeon app.

STMPE811 TouchScreen MCB1700

Library for robot Cing with Attiny84. This library simplifies programming of robot Cing.

Allows use of the ARM Cortex-M0 TC4 and TC5 counters for periodic interrupts. With this library you can use the TC4 and TC5 counters of an ARM Cortex-M0 based board to generate periodic interrupts. The counters have a 1 second resolution.

Bertl Programm für den Motor, reagiert auf die Taster. (Falsche Richtung)

Allows to control the Building Lights educative system. This library allows you to control every device of the Building Lights educative system. This is part of the subject called Educacion Tecnologica II at ORT Belgrano.

Enable Blynk support of Teensy boards, especially latest Teensy 4.0, using WiFi, Ethernet, BT/BLE and GMSM/GPRS shields

DCmotor Rotation using select pin

Arduino library for CodeCodeCodec's projects.

processes emg signal including filtering

FLYSKY RC receiver compatible with TH9X transmitter. Uses an A7105-CL or A7105-SY 2.4Ghz module.

Provides a simple interface to the SHT1x series (SHT10, SHT11, SHT15) and SHT7x series (SHT71, SHT75) temperature / humidity sensors from Sensirion

Versatile multi-platform PID control library

Arduino library to access OctoPrint API. Arduino library for use with compatible micro controllers to access the Octoprint API on a Raspberry Pi (or any Linux based box) running the OctoPrint 3D printer web server.

mbedtls clone that only support tls-psk on esp8266

PokittoLib is the library needed for programming the Pokitto DIY game console (www.pokitto.com)

BSP files for STM32H747I-Discovery Copy from ST Cube delivery

3-axis MEMS ultra low power accelerometer

Driver for the JY-MCU v1.06 HC-06 Bluetooth module.

first publish

Class library for a Nextion graphics LCD to provide basic graphics and touch functions.

VC0706 driver for radio shack camera shield

An Arduino library to control the Iowa Scaled Engineering I2C-IRSENSE ( https://www.iascaled.com/store/I2C-IRSENSE ) reflective infrared proximity sensor. Because the I2C-IRSENSE is just a breakout for the AMS TMD26721, this library may be useful for controlling other implementations as well

final

Allows you to draw on your MKR RGB shield. Depends on the ArduinoGraphics library.

Use SCT-013-000 current sensor as a workproof. CurrentSwitch Is a library to use non invasive current probe to use it a a 'working proof'. This skecht use a SCT-013-000. Interface with arduino.

A simple touchscreen user interface for Teensy. Easy to use library for building Teensy applications with a menu based user interface.

A library for FaBo LCD I2C Brick. 16x2 LCD I2C module.

qq

This library is designed to work with devices like the LM335 temperature sensor. There are only two requirements for compatibility: 1) The device must be a sensor device that has an analog voltage output. 2) The physical quantity measured must vary linearly with the analog voltage. The LM335 creates an analog voltage proportional to temperature. It can work very well with this library using the nominal multiplier of 0.0050354 and offset of -273.15 or by providing two user defined calibration poi

Library for Make Game with GameLoop

An Arduino library that controls the DigiPixel shield. The DigiPixel is an open source Arduino and Digispark compatible shield with a 64 pixel RGB LED display and six buttons.

A library that provides access to Parse. Provides convenience methods to access the REST API on Parse.com from Arduino.

This library has been tested with LPC1768.I can use the analog port of six of p20 from p15 of the LPC1768.

A library that makes coding user-friendly for programming robots. Specially designed to work with Robby, a Mr. Robotics' robot.

new Xadow GPS module

Color SPI LCD+OLED library with many unique features. Supports most popular LCD and OLED color display controllers. Includes DMA support, display Windows BMP (and RLE), bitmap rotation, transparent text, translucent 1-bpp masks and optimized primitives. Optional back buffer for fast memory operations.

EmbUnit library for mbed. EmbUnit is a unit testing framework for embedded software. (more info: http://embunit.sourceforge.net/ )

A library for sending log messages over the serial connection of Arduino based microcontrollers.

A library for common Feather boards and wings

Arduino wrapper for ESP32 NVS (Non-volatile storage)

Si7006 Arduino Library.

Bosch BMP085 Barometric Pressure Sensor

LED bus driver on any GPIO pin for addressable RGB LEDs (like NeoPixels or other WS2812 based LEDs)

A library to control a 16x2 LCD via an I2C adapter based on PCF8574. The library uses the Wire.h library for I2C comunications.

A library for the ams AS3935 lightning sensor. The library supports both the SPI (via the SPI Library) and I2C (via the Wire Library) interfaces. Use of other I2C / SPI libraries (e.g. software I2C) is supported by inheritance.

Very simple class to give slow speed PWM using timers and digital out.

A non-blocking Arduino library for controlling 28BYJ-48 stepper motors. Permits the control of 2 or more 28BYJ-48 stepper motors without blocking the execution of the sketch and provides methods for the control of the steppers. Simple and strightforward implementation.

点亮一个灯

Arduino library for the DS7505 temperature sensor. Arduino library for the DS7505 temperature sensor. The originally code was based on the Adafruit_MCP9808_Library.

ILinterpreter

A library for interfacing arduino device with VITCON IoT service. This is a simple IoT device sdk powered by VITCON IoT online widget editor. WIFI-LINK is needed for a device to connect to VITCON IoT broker server. You should install VitconCommon library prior to VitconIOT library.

This is a library for operating FED3. This is a library for operating the Feeding Experimentation Device version 3 (FED3)

A simple library for decoding MP3 files with the VS1053 CoDec chip.The initial library was written by Kaoru Onoe.The library is patched to work with some "LC Technology" VS1053 board that have some IC pins disconnected.Because of that problem, there was no sound out of that boards.Now, these board work ok !

touch screen handler for the microchip AR1020

KS0108 LCD LIB with I2C I/O expander PCF8574 for Databus

Semtech SX1272 radio chipset driver - ported based on Semtech SX1276 driver.

Library of Infineon's highly sensitive DPS368 sensor.

Use Modbus equipment with your Arduino. Using TCP or RS485 shields, like the MKR 485 Shield. This library depends on the ArduinoRS485 library.

This is library for synchronizing with NTP time server

Fork of FNET TCP/IP v4.6.4 stack for Teensy USB Ethernet. This stack can be used with any Ethernet device, it was designed for 32 bit MCUs. It's not strictly limited to USB, but this was ported for that purpose.

esb gcc program

This library is made to build sophisticated User Interface on Arduino for text Lcds.

ExternalIn

Library for an Ampled Pulse Sensor

Displays variable values on a simple web page. Minimal library for displaying values on ESP platforms. Asynchronously refreshes.

DigitalPotentiometer code for MCP4131.

Unofficial repository for combined U8G and U8Glib-ARM with HAL extensions

A library that makes Internet of Things send data to PointzNet.com. Support ESP8266WiFi.h.

LED matrix library for http://goo.gl/y6VnO6

simple reliable networking over ethernet. Provides IPv4 ARP, ICMP echo reply, and UDP unicast. Does NOT provide TCP, that's not simple :-).

A library for ESP32 NVS (Non-volatile storage)

Tool that opens a comport for every mbed connected to your computer with one command - never look for the COM number again!

pixy2 smart camera librarywww.pixycam.com

Arduino library to wrap a random generator in a stream. usefull for testing with streams

this is the working code for the xdot to read in serial from the pi and send it over LoRa

Small library for controll the TTL74HC595, who is a SerialIn-ParallelOut

An improved EEPROM library for ESP8266. The ESP8266 family doesn't have genuine EEPROM memory so it is normally emulated by using a section of flash memory. With the standard library, the sector needs to be re-flashed every time the changed EEPROM data needs to be saved. For small amounts of EEPROM data this is very slow and will wear out the flash memory more quickly. This library writes a new copy of your data when you save (commit) it and keeps track of where in the sector the most recent copy is kept. The flash sector only needs to be erased when there is no more space for copies in the flash sector. You can keep track of this yourself to do a time-consuming erase when most convenient or the library will do it for you when there is no more space for the data when you commit it.

Snake game snake library

HomologationCachan

Adafruit 2.2" TFT with SPI interface and microSD card holder

Control DMX lights with an ESP8266

Made it for CESmartCamp#12. this library use to control HC-SR04 in lots of board and a lot of example

This repo contains the libraries of Mbed for LPC1549 with following changes: - IAP commands. - EEPROM write and read. - UART write and read (public) - CAN can_s -> LPC_C_CAN0_Type *can

Support for the TI TCA9584A Low-Voltage 8-Channel I2C Switch with Reset. This is an 8-channel I2C multiplexer which is useful to allow multiple I2C devices with the same address to share a single I2C bus.

A library to control esp-8266 from Arduino by AT commands easier. It can send GET request from esp8266 by AT command from Arduino.

Library for accelerometer and SysClean

Software I2C library implementation for Arduino. Simple software I2C-master implementation

Modtronix inAir9 driver based on SX1276 standard driver

EEWL library allows to extend the EEPROM life by distributing data writes along a circular buffer.

PURS_ZI_011

32dot x 16dot LED matrix display driving library.

Uniot is an IoT platform with its own task scheduler and lisp interpreter

OpenRTK Base Library

Formulinha Robot Library. Control everything in your robot in a super easy way!

Driver for the AD5270 digipot

SSD1306 oled driver library for 'monochrome' 128x64 and 128x32 OLEDs

library for MAX14661 16:2 mux

A library to read/write the various registers of the PCF8583 Real Time Clock/Calendar including the 240 bytes of non-volatile ram. Includes a printf like date/time formatting routine.